About 4 hours in the front; longer in back. Revolights are shipped with 1100mAh batteries. Eight LEDs sink about 250mA total during operation, making for about 4 hours of runtime.
Preventing thievery was an important consideration during the design phase. Because Revolights consist of a solid-ring body welded together during fabrication, the wheel must be removed from the bike in order to remove the Revolights. When you lock up your bike and wheels, you’re also locking up your Revolights!
Weight per wheel is 12.3 oz with battery. The full set including the batteries and mounting hardware weighs as much as a small bottle of water.
Absolutely. We are currently using rechargeable lithium-ion batteries because they are a particularly efficient way to power LEDs. We also designed our own battery pack in order to maximize efficiency. That said, we are firm believers that the energy created by wheel rotation is a sustainable, environmentally friendly power source. We have plans to incorporate dynamo power in the future.
There are a total of 24 LEDs on each wheel, 8 of which of are lit up at any given moment. Each LED is rated at over 35 lumens, but since our LEDs are continually rotating and lumens are a unit of flux (light/area) the most accurate description would be: Revolights brightness = 8 LEDs x 35 lumens each.
Most bladed spokes don't present a problem for install, but some can be so thin as to prevent the spoke adapters from clamping securely. If your wheel has trouble give us a call at (415) 881-7386 and we can walk you through an easy work around.
We went to great lengths to design Revolights to stand up to wet conditions. The electronics are fully sealed effectively isolating them from the environment. That said, exposure to salt or alkaline dust on the roads creates issues for most electronics, Revolights included. Lithium batteries can also slow their discharge rate during long-term exposure to extreme cold.
We fit many 700c/27in wheels and 26in wheels. Here’s a link to our fit chart to check if your bike is Revolights compatible: http://revolights.com/pages/fitchart
Revolights Eclipse for 700c/27inch wheels will fit a 29" tire, however generally the tires are quite wide (the max we support is 38mm). So depending on tires size you have they may block the ability for the lights to act as a headlight and taillight, but you will still have side visibility.
Revolights is compatible with disc brakes. Unfortunately Revolights Wheels will not work with disc brakes.
Revolights will work with fenders. However, if you have a rear fender the rear projection of light will be partially blocked from directly behind depending on how long the fenders are but the sides will still be completely visible.
Our 700c kit will fit up to a 45mm deep v rim with our modified hardware. The hardware that enables Revolights to fit deep v rims is available under the Modified Harware selection on the store page.
A tire width that is greater than 38mm is not ideal, but Revolights will still fit. Our concern is that the tire width will partially block some of the forward and rear projection of light but the side view will still be completely visible.
We are sorry to say that Revolights will not fit 20in wheels. We currently only fit road and hybrid bikes with 700c/27in or 26in wheels. We are working on new styles or designs and we hope to have Revolights fit a variety of bikes in the future.
The current design can only fit bicycles and does not work with motorcycles. We do realize that a design option that is compatible with motorcycles is a huge opportunity and we'd love to achieve this goal in the future.
We do not currently have a wheelchair compatible design but we hope to be able to fit them in the future.
We ship to all EU countries from our warehouse in the UK. For larger orders we can also offer FOB terms. Please contact firstname.lastname@example.org for more information.
A first time install usually takes around an hour, with the second wheel going much faster than the first. Someone who has installed a few sets can generally keep it to about a half hour for most installations.
This is almost always due to the magnet not being sensed by the sensor inside the ring. First steps are to double-check that the magnets are on the non-drive side of the bike and that they are within about ~6mm (1/4") of the Revolights ring. If you require magnet extensions or the issue remains please reach out to us, email@example.com.
This is usually caused by larger than normal tire guides on the brake pads. The quick fix is to swap the bake pads Left to Right AND rotate them 180 degrees so the tire guide tabs point up, away from the Revolights rings. Swapping the pads Left to Right is necessary in combination with rotating them 180 degrees to make sure the braking force acts in the same direction.
If the bike is upside-down this is normal. If not, this is most often caused by the W-Wire ring not having been installed on the non-drive side of the bike (the rider's left side). If the issue is on the front wheel you can usually just remove the wheel and turn it around. If it is the rear wheel the rings need to be swapped left/right.